KW DDC ECU coilover suspension inox | fits BMW 3/4 Series RWD (F30/F32) | 39020017

AED 0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

AED 0.00*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW39020017

Product information "KW DDC ECU coilover suspension inox | fits BMW 3/4 Series RWD (F30/F32) | 39020017"

KW coilover suspension DDC ECU

KW Dynamic Damping Control ECU Individuality at the touch of a button.
The KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a vehicle-specific sporty and harmonious damper characteristic with a stylish and sporty lowering. The adaptive KW coilovers are available in the KW DDC ECU version with optional app control for vehicles without actively controlled standard suspension and as KW DDC Plug & Play version for selected vehicle models with adaptive standard suspension.
The adaptive KW DDC ECU coilovers allow a stepless lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years. Depending on the vehicle, lowering takes place either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW technology "Made in Germany".
Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. This warranty is up to five years when installed by one of our KW specialist dealers. The adaptive KW DDC ECU coilovers with app control are currently available for Audi, BMW, Mercedes-Benz, Porsche, VW and many other vehicles such as the Range Rover Evoque.

- retrofittable electronic damper adjustment, combined with the advantages of a KW coilover suspension
- with optional app control
- Three damping setups: Comfort / Sport / Sport +
- Operation via retrofit button or optional app
- Create your own setups intuitively via KW DDC app

KW DDC button - 1x button, 3x learn more
The scope of delivery of the KW DDC ECU coilover kit also includes a KW DDC button. This allows you to select the KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. The KW DDC button changes the colour to match the KW DDC APP.

W-LAN module & app control
Optionally available app control for live suspension tuning via iPhone, iPod touch, iPad.
Experience top-class innovation and quality "Made in Germany": the KW DDC (Dynamic Damping Control) coilover suspension with ECU (Electronic Control Unit). The coilover suspension with its electronically adjustable dampers enables intelligent suspension tuning via app control and is already available for numerous vehicles without adaptive standard suspension.
This allows you to upgrade your vehicle with adaptive damper control and optionally adapt it to your driving style via the KW DDC app. You do not need any tools or have to work on the dampers yourself.
The free KW DDC App in combination with our optionally available W-Lan module is your tool to carry out an individual damper tuning live and in real time.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)
- Not for vehicles with electronic damper control

Technical information:
Product line: Street Performance
Lowering VA/HA (mm): 40-65/30-60
Design: DDC - ECU
Hardness adjustment: Rebound and compression
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 318 d Notchback Diesel 110 KW 1995 ccm 4 Rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 d notchback diesel 140 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i notchback petrol 135 KW 1998 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 325 d notchback diesel 155 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 325 d notchback diesel 165 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 d notchback diesel 190 KW 2993 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 d Notchback Diesel 210 KW 2993 ccm 6 Rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 i notchback petrol 185 KW 1998 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i notchback petrol 224 KW 2979 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i notchback petrol 225 KW 2979 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i notchback petrol 240 KW 2979 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i notchback petrol 250 KW 2979 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 340 i notchback petrol 240 KW 2998 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 340 i notchback petrol 265 KW 2998 ccm 6 rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 425 d Coupe Diesel 155 KW 1995 ccm 4 rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 425 d Coupe Diesel 165 KW 1995 ccm 4 rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 425 i Coupe Petrol 135 KW 1998 ccm 4 rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 430 d Coupe Diesel 190 KW 2993 ccm 6 Rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 430 d Coupe Diesel 210 KW 2993 ccm 6 rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 430 i Coupe Petrol 183 KW 1998 ccm 4 rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 435 i Coupe Petrol 225 KW 2979 ccm 6 Rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 435 i Coupe Petrol 250 KW 2979 ccm 6 Rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 440 i Coupe Petrol 240 KW 2998 ccm 6 Rear-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 440 i Coupe Petrol 265 KW 2998 ccm 6 Rear-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Last seen products

Air filter | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G87) S58 | Aulitzky Tuning

Here you get a sports air filter with all its advantages:- higher air flow rate- higher filter performance (even smaller particles are filtered)- The particles are trapped in the filter after intake and thus remain trapped until cleaning.- Washable and reusable filter- Increased air flow and therefore better combustion in the engine- No reduction in air flow over a minimum of 50,000 km- Sufficient air even at high engine speeds- more power- Better intake noise- Reduced fuel consumption These sports air filters have polyurethane as the edge material. Polyurethane is more resistant to petrol, vapours and the like. It has an ideal remoulding. This ensures that the edge of the filter is 100% sealed even when it is reinserted after cleaning. The edge surface is made from a single mould. With many other makes, pores in the edge material and joining surfaces where the edge is joined together often lead to a crack in the edge, which can result in unclean air being sucked into the engine. With paper filters, the air flow rate is significantly lower and decreases further after just a short period of use.In addition, paper filters must be disposed of after the specified mileage. TitanTec sports air filters last a lifetime. This is good for the environment and your wallet.Other washable cotton filters only filter much larger particles compared to TitanTec sports air filters. Cleaning the filters:A TitanTec sports air filter has no oil residue and has 100% of its original performance again after cleaning.Cleaning is quick and easy.We recommend cleaning after 15,000-20,000 kilometres or once a year at the latest.The best time to clean the air filter is around the end of May or beginning of June, i.e. after the pollen count, as this is the time when the air filter is under the most strain.Under no circumstances should aggressive cleaning agents such as petroleum ether, cleaning petrol, brake cleaner etc. be used, as this can damage the material. Details: Type: 2x panel filter Length: 187 mm Width: 235 mm Compatible vehicles: BMW 2 Coupe (G42, G87) M2, 460 hp, 338 kW, from 11/22 BMW 3 (G20, G80, G28) M3, 480 hp, 353 kW, from 11/20 BMW 3 (G20, G80, G28) M3 Competition, 510 hp, 375 kW, from 11/20 BMW 3 (G20, G80, G28) M3 Competition xDrive, 510 hp, 375 kW, from 05/21 BMW 3 (G20, G80, G28) M3 CS xDrive, 551 hp, 405 kW, from 03/23 BMW 3 Touring (G21, G81) M3 Competition xDrive, 510 hp, 375 kW, from 07/22 BMW 4 Coupe (G22, G82) M4, 480 hp, 353 kW, from 11/20 BMW 4 Coupe (G22, G82) M4 Competition, 510 hp, 375 kW, from 11/20 BMW 4 Coupe (G22, G82) M4 Competition M xDrive, 510 hp, 375 kW, from 05/21 BMW 4 Coupe (G22, G82) M4 CSL, 551 hp, 405 kW, 05/22 to 02/23 BMW 4 Convertible (G23, G83) M4 Competition M xDrive, 510 hp, 375 kW, from 07/21

AED 644.57*

Valve Stem Seals | passend für Engine Double - 12 Cylinder | Blackboost

Valve Stem Seals by BlackBoost. Precision-engineered performance upgrade for Engine Double - 12 Cylinder.

AED 439.55*

Intake system Carbon | fits BMW M5/M8 (F90/F91/F92/F93) 600hp S63 | Eventuri

Facts: Acceleration time: 60-130mph Reduced by 0.22 seconds Max. Flow rate per airbox at 28? H2O: Standard 620 CFM, Eventuri 736 CFM Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The F90 Eventuri intake system has been developed through extensive real-world testing and airflow simulation analyses. Now in the updated V2 design, it features sealed filter housings to maintain a more stable IAT even when stationary. The new covers that seal the housings, in conjunction with our blade and shield combination, provide unrestricted airflow while maintaining low IATs through cold air saturation. Our large front air scoops channel ambient air directly into the intake area, ensuring that the engine does not suffer from heat soak. In addition, our gold-coloured, heat-reflecting shields have integrated flow guides that direct the ambient air from the blades into the filters. We have also managed to increase the cross-sectional area of the inlet pipe by over 30% compared to the standard inlet, as it passes through the openings in the struts. The Eventuri difference The F90 Eventuri system uses our patented carbon fibre housings with our bespoke Gen 2 filters, providing an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce turbo drag. Internal volume Another important design feature of the inlet housings is the internal volume of the tubes as they pass through the struts. On the F90, the airbox system must pass through an oval opening in the strut brace on each side before reaching the turbo inlets. We have managed to increase the internal size of our inlets at this junction, resulting in more available volume for the turbos and therefore less restriction. The increase in cross-sectional area between the Eventuri and the standard airbox is 31% as follows: Inner cross-sectional area of the intake pipe at the strut brace: Standard airbox pipe = 6487 mm² Eventuri intake pipe = 8497 mm² Each intake system consists of: 2 x carbon fibre venturi housings with integrated pipes 2 x customised high-performance Generation 2 filters 2 x carbon fibre filter covers 2 x aluminium intake covers 2 x carbon fibre air scoops 2 x laser-cut heat shields, lined with gold heat reflective material 2 x laser-cut air ramps integrated into the heat shields High-quality silicone couplings and OEM hose clamps Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M5 e1*2007/46*1828*.. DE/AT BMW M5 Competition e1*2007/46*1828*.. DE/AT BMW M8 e1*2007/46*2019*.. DE/AT BMW M8 Competition e1*2007/46*2019*.. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 5 Series (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 - BMW 8 Series (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B07.19 -

AED 10,952.10*

Engine cover Carbon with cutouts | fits for Lamborghini Huracan | Eventuri

Facts:Material: CarbonManufacturer: EventuriExpert opinion: without Our complete engine cover set is made from prepreg carbon fiber and has cutouts to expose our intake, which is sold separately. Available in a satin finish to reduce reflections into the interior and also contrast with the glossy intake system underneath. The complete set consists of the main center cover, two side covers and the rear strut cover. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Lamborghini Huracan5.2 LP 580-25.2 LP 610-25.2 LP 610-4426kW / 580hp449kW / 610hp449kW / 610hp5204cm³CSJB, DKBDGFACSJB, DKB Lamborghini HuracanLP 640-2470kW / 640hp5204cm³DGFB Lamborghini Huracan5.2 Performante470kW / 640hp5204cm³DGFB

AED 22,772.80*

Competition intercooler kit EVO 2 | fits Porsche 911 (997.1) 3.6 Turbo 480hp | Wagner Tuning

The Wagner Tuning Competition intercooler kit EVO 2 upgrade kit fits the following models:Porsche 997 Turbo (2006-2008) 3.6L; 353KW / 480hp EVO 2 high-performance intercooler kit: The ultimate performance upgrade for your Porsche 997 Turbo Experience the unbridled power of your Porsche 997 Turbo with our EVO 2 High Performance Intercooler Kit. Here's what this kit has to offer. Our EVO 2 high performance intercoolers (2 x [330mm x 222mm x 145mm] = 21,244cm³) are designed to provide a whopping 77% more charge air volume than the factory intercoolers. This means a significant increase in the performance of your vehicle. Our specially developed competition high performance mesh ensures excellent cooling characteristics. Even under extreme conditions, your engine will maintain the optimum temperature. Despite its impressive performance, our intercooler kit is surprisingly light. Each of the two coolers weighs just 2x 6.7 kg, which helps to reduce weight in addition to increasing performance. CAD-developed free-form end boxes made of cast aluminum ensure the best possible internal air flow and a high pressure resistance of up to 6 bar (tested). Our kit includes a custom-fit carbon air duct which ensures that the intercooler is optimally supplied with fresh air. This is crucial for the maximum performance of your vehicle. The kit includes additional silicone hoses with an enlarged cross-section to optimize the airflow. Our intercoolers are coated with an anti-corrosion coating that not only ensures longevity, but also has excellent heat conduction properties. Our kit comes complete with new carbon air guides, silicone hoses and aluminum adapters. Installation is simple and is done in exchange for the factory intercoolers. This kit is specifically designed for racing and features a 70mm inlet and outlet for maximum performance. Get the most out of your Porsche 997 Turbo with our EVO 2 high performance intercooler kit. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 77% more charge air volume- extended to 70 mm inlet and outlet- Precisely fitting carbon air duct- simple replacement Scope of delivery:2 intercoolers4 carbon air ducts4 silicone hoses4 hose clamps1 mounting materialAttention: Not approved in the area of the StVZO.

AED 14,792.00*

KW DDC ECU coilover suspension inox | fits BMW 3/4 Series RWD (F30/F32) | 39020017

Ratenrechner

Ask a question

Previously asked questions