MOVIT DDE steel brake system 380x32mm (6 piston calliper) for the front axle, from 19 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined.
The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications.
The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts
Attention: The conversion means that only rims with at least 19 inches can be fitted!
The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate.
MOVIT sports brake callipers, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force
MOVIT sports brake discs, 380x32mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Highest fading resistance- Special alloy for high thermal conductivity
MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life
Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate
Compatible vehicles:BMW 5 Series (E60) M5 373kW / 507PS / 4999cm³ / S85BMW 6 Series (E63) M6 373kW / 507PS / 4999cm³ / S85
Includes the following services:
- Removing and replacing the connecting rod bearings
- Check and measure crankshaft journals
- Check and adjust the oil pump
- Clean all parts
- Wheel alignment
- Oil & filter change
- incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60)
- Entry in the service booklet with BMW registration number stamp
- 1 litre oil refill
In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge.
Please note:
This service can only be carried out at our company headquarters!
Includes the following services:- Remove and replace connecting rod bearings- Check and measure crankshaft journals- Check and adjust oil pump- Clean all parts- Wheel alignment- Change oil and filter- Including all parts such as bearings, screws, seals, oil filter and engine oil (10W60)- Entry with BMW company number stamp in the service booklet- 1 l oil refillIn addition and depending on requirements, we can also replace the spark plugs and engine bearings for an additional charge for the parts.
Note:This service can only be carried out at our company headquarters!
Facts:
Power increase of up to +15 hp
Material: Carbon
Manufacturer: Eventuri
Parts certificate: A certificate is available for this product for certain regions and vehicles (details below)
The Eventuri Carbon Intake System for the E60 and E63 is designed to increase engine performance, improve handling and enhance the overall driving experience.
The main aspects are the balance between aerodynamic efficiency and air intake temperature. An open system was chosen but with differences to other aftermarket airboxes. This can be recognised by the shape of the carbon housing and the position and shape of the air filter. The inverted cone-shaped filter, which is also encased in carbon fibre, creates the so-called Venturi effect.
The resulting uniform laminar airflow means that a power increase of +15 hp is realistic.
The airbox is manufactured using the prepreg carbon fibre process.
Parts certificate
The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.
A certificate is available for this product for the following regions and vehicles:
* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24
Country Model Type approval*
DE/AT BMW M5 e1*2001/116*0297*..
DE/AT BMW M6 e1*2001/116*0297*..
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction
BMW 5 Series (E60/E61)M5373kW / 507hp4999cm³S85 B50 A09.04 - 12.10
BMW 6 Series (E63/E64)M6373kW / 507hp4999cm³S85 B50 A09.05 - 08.10
The sports air filter for the F97 and F98 features a direct-fit design that does not interfere with your vehicle's ECU recognition and retains the original design.
- Improved mileage
- Reduced emissions
- Cost-effective and quick upgrade
- Extends the life of the engine
- Increased performance
- Improved airflow
- Reusable, can be cleaned
- Larger filter area
- Higher air permeability
- Not approved in the STVZO area
OEM part number: 13729502014
Compatible vehicles:
- X3 M / Competition (F97)
- X4 M / Competition (F98)
Compatible vehicles:BMW F90 M5 441KW/600hp (2017+)BMW F90 M5 Competition 460KW/625hp (2018+)BMW F90 M5 CS 467KW/635hp (2021+)BMW F91/92/93 M8 441KW/600hp (2019+)
Boost your model's performance to a new level with the Wagner Tuning high-performance intercooler!
The 4.4-litre V8 biturbo engine (S63 B44T4) has an indirect charge air cooling circuit in which the charge air is cooled by a water-cooled charge air cooler. With our innovative high-performance intercooler from Wagner Tuning, you can replace the original intercooler and experience an impressive increase in performance.
Our high-performance intercooler has a new type of performance mesh with dimensions of 192 mm x 156 mm x 128 mm. It has been specially developed for the high demands of the engine and offers an incredible 75 % more external mesh volume compared to the standard intercooler. The optimised ratio between the inner and outer cooling surface ensures maximum heat transfer and optimum internal airflow. The cast aluminium end boxes were designed using the latest CAD technology and optimised using CFD simulations. The result is outstanding cooling properties with minimal back pressure, ensuring optimum cooling of the supercharged air with a significant increase in performance. This kit is ideally suited even for demanding racing.
To ensure a long-lasting cooling effect, all Wagner Tuning intercoolers are equipped with a thermally conductive anti-corrosion coating. Installation of the system is uncomplicated thanks to our detailed installation instructions and is carried out in plug & play style.
Advantages:- Significantly improved cooling performance- More power and torque for your engine- Mechanical relief of the turbocharger- Additional WMI ports- 100 % pressure resistance- 100 % plug-and-play- Up to 4 years warranty
Mains dimensions OEM intercooler:152 mm x 143 mm x 100 mmV = 2.19 litres
Mains dimensions Wagner Tuning intercooler:192 mm x 156 mm x 128 mmV = 3.83 litres (+75%)
Scope of delivery:2 intercoolers5 silicone air hoses1 mounting material
Attention: Not authorised in the area of the StVZO.
AutoTecknic carbon fibre front bumper canards are the complete solution to aerodynamically optimise the handling of the front of a car. Made from lightweight and durable carbon graphite composites, AutoTecknic carbon fibre front bumper canards help to increase front downforce at high speeds.
The additional downforce stabilises the car's chassis during hard cornering and increases traction for faster lap times. The optical properties of the carbon also give the F80, F82, F83 a more aggressive design.
Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019
Facts:
Performance increase with up to 15 hp
Material: Carbon
Manufacturer: Eventuri
Parts certificate: A certificate is available for this product for certain regions and vehicles (details below)
Big cars - big intakes. With the intake system for the Audi RS6/RS7 C7, Eventuri sets new standards in precision and efficiency not only for itself but for the industry. Thanks to the two patented Eventuri air filters, the air flow is channelled laminar and without turbulence directly into the turbos. In addition to the rich sound of the intake, the Audi RS6/RS7 C7 intake comes with a significant increase in performance of up to 15 hp.
The two-part, large heat shield ensures optimum shielding of the air flow from the engine heat. The heat shield cools itself through a small air slot between the insulating plates. The ingenious, fluid processing of the scoop for the air intake and the seamless transition into the patented Eventuri housing made of full carbon fibre ensure an individual and captivating look.
The Eventuri intake for the Audi RS6/RS7 C7 comes in the following components:
Carbon filter housing with integrated inlet pipe
2 efficient high-flow cones with urethane filter
Carbon scoop
Carbon filter cover
CNC milled mount for the mass air flow sensor
2-piece main heat shield
Laser-cut suspension
The well-known Venturi effect is enhanced by Eventuri's technically ingenious product design. The alignment of the airflow through the elegant scoop creates a suction as it enters the filter housing through the filter, which compresses the airflow perfectly and directs it into the turbo. The optimised airflow then ensures a significant uplift in engine performance.
Parts certificate
The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.
A certificate is available for this product for the following regions and vehicles:
* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24
Country Model Type approval*
DE/AT Audi RS6 (4G) e1*2007/46*0544*..
DE/AT Audi RS7 (4G) e1*2007/46*0544*..
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction
Audi A6 (C7)RS6 quattro412kW / 560hp3993cm³CRDB, CWUB01.13 - 09.18
Audi A6 (C7)RS6 performance quattro445kW / 605hp3993cm³CWUC11.15 - 09.18
Audi A7 (4G)RS7 quattro412kW / 560hp3993cm³CRDB, CWUB10.13 - 04.18
Audi A7 (4G)RS7 performance quattro445kW / 605hp3993cm³CWUC11.15 - 04.18
AED 9,463.31*
This website uses cookies to ensure the best experience possible. More information...