Aulitzky Exhaust | Race flap control module | fits BMW M3 (E90/E92/E93) | Motorsport articles

Actuator for exhaust flap OEM part number: 18307851568 (18 30 7 851 568) Suitable for the following BMW models with exhaust flap: F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98 G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83

Experience the fascinating world of carbon air intakes customised for the F87. These have been developed to give your vehicle a unique appearance.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee - with parts certificate according to §19.3 Scope of delivery:- 1x SOOQOO air intakes Compatible vehicles:BMW M2 (F87)BMW M2 Competition (F87) Note: This is NOT an original BMW product!

Facts: - 2x 3.15" (80mm)/ 2.56" (65mm), replaces the main catalytic converter - with 200 cell stainless steel sports catalytic converter - Euro 6 compatible - with Thermo-Integral insulation - with ECE approval* Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of construction BMW 2 Series (F87)M2 Competition302kW / 411PS2979cm³S55 B30 A06.18-06.21 BMW 2 Series (F87)M2 CS331kW / 450PS2979ccS55 B30 A11.19-06.21 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - Tailpipes: 4x101mm black matt - stainless steel 3 inch (76mm) - Electric flaps - Exhaust flaps with ceramic bearings - Made in Germany (Lake Constance) - with ECE approval * Scope of delivery: - 1x Aulitzky Exhaust exhaust system from OPF - 4x tailpipes 101mm black matt - ECE handoutCompatible vehicles:VehicleTypePowercubic capacityEngineYear of constructionBMW 2 Series Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21BMW 2 Series Coupe (F87)M2 CS331kW / 450hp2979cm³S55 B30 A11.19 - 06.21 *The combination certificate is available (includes Intakte, intercooler, boost / charge pipe kit, downpipe, exhaust system, 560hp Aulitzky App performance increase and 95dB increase in stationary noise).In conjunction with the standard or ECE flap control system (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.

The Aulitzky Exhaust OPF-Deleter module is used to mechanically remove the OPF (gasoline particulate filter) without subsequent software adaptation.It is installed in the engine compartment and can be removed at any time without leaving any residue. - No error messages from the module- No detection possible using the manufacturers test device Notes:An OPF deleter is only there to suppress an error message from the catalytic converter or OPF monitoring.  This can appear if, for example, a modified downpipe or an export flap control is installed and the flaps are permanently open as a result.Caution:The OPF must still be installed.However, if the OPF is removed completely, the OPF offset cables are required in addition to the OPF deleter. (These are also available in the online store).1. after removing the OPF, the complete sensor system including all lines must still be connected to the exhaust system and be tight! Otherwise, error messages will appear despite the OPF deleter and offset cable!2. for F8X M models, the package consisting of OPF deleter and OPF offset must be purchased from the outset when installing an export flap control, otherwise error messages may still occur despite the OPF being installed! Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21BMW 2er Coupe (F87)M2 CS331kW / 450hp2979cm³S55 B30 A11.19 - 06.21 Note: This product is NOT approved in the StVZO and is NOT intended for sale within the EU! intended for sale within the EU! This item is intended exclusively for show and motorsport purposes and must not be used/installed on public roads. If the component is installed on/in the vehicle, the operating license expires! For dealers only. No sale to end customers!

Function: - Variable flap control of the original or retrofitted flap exhaust system - Can be controlled via steering wheel buttons Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW 2er Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18BMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21BMW 2er Coupe (F87)M2 CS331kW / 450hp2979cm³S55 B30 A11.19 - 06.21 Note: This product is NOT approved in the StVZO and is NOT intended for sale within the EU! This item is intended exclusively for show and motorsport purposes and must not be used/installed on public roads. If the component is installed on/in the vehicle, the operating license expires!The pictures shown are examples.

Facts: - 2x 3" (76mm) - catless - for current OPF models - with Thermo-Integral insulation - without approval in the area of the StVZO*Compatible vehicles:F87 competition, F80 F82 F83 each Competition, CS, GTS.Please note: This article is not authorised for use on public roads. Only suitable for racing and export.

Erste Hand, unfallfrei Nur Shell V-Power oder Aral Ultimate Alle Services bei Aulitzky, BMW oder Raab Motorsport durchgeführt. Kein Wartungsstau. Kein Notverkauf. Fast alle Serienteile sind vorhanden (Sitz, Rücksitzbank, Ansaugung, Auspuff, Fahrwerk, Bremsbeläge…) TÜV komplett alles eingetragen (außer Bremsbeläge)   - Leistung Aulitzky mit Abstimmung für Rennstrecke. Ca. 520 PS und 700 NM     - Tracktool - Apple Carplay ganzer Bildschirm - Aulitzky App inkl. Dongle - Akrapovic Auspuff ab OPF - Liteblox Batterie - Bremsbeläge Pagid RSL29 vorne 70% hinten 95%  - Bremsbelüftung Speed Engineering - Bremskolben Edelstahl und spezielle Manchetten - Stahlflexbremsleitung - Charge und Boost Pipe - Clubsport Set und Teppich - CS Frontspoiler org. BMW - Diffusor org. BMW - Differential Westwood Performance mit Höherlegungskit - Display AK-Motion - Downpipe HJS - Eventuri Ansaugung - Fahrwerk KW Clubsport mit Nordschleifenabstimmung Wolfgang Weber - Felgensatz Protack One 10x19 ET20 und 10,5x19 ET40 mit Continental Sport Contact 7; 265/30/19 und 285/30/19 (80%) - auf Wunsch zweiter Felgensatz Protack One 10x19 ET20 und 10,5x19 ET40 mit Nankang CR-S; 265/30/19 und 285/30/19 NEU Stehbolzen - GTS Flash - Heckspoiler org. BMW - Hosenträgergurte Schroth - Kurbelwellensicherung Aulitzky - Ladeluftkühler Wagner - Recaro Pole Position inkl. Schiene - Spurstangen KW - Stabi VA H&R - Upgrade Zündspulen und Zündkerzen  - kleiner Achsstand Westwood Performance (Uniball VA und HA) Das Fahrzeug kann über unsere Hausbank finanziert werden. Bei Fragen und ernsthaftem Interesse freuen wir uns über eine Kontaktaufnahme.

The Endless pads are an excellent brake pad for everyday road use with sporadic track days. Despite reduced dust and noise emissions, the MX72 brake pad impresses with excellent deceleration values even in the high temperature range. In contrast to the ME20 and ME22 pads, the MX72 has heat protection plates.Coefficient of friction 0.37 - 0.47 µOperating temperature 50 - 700 °CSemi-metallic pad For the front axle. Compatible vehicles:BMW M2 F87 Competition with large gray 6-piston sports brakeBMW M2 F87 CSBMW M5 F10 Motorsport article - without STVZO approval.

The Endless pads are an excellent brake pad for everyday road use with sporadic track days. Despite reduced dust and noise emissions, the MX72-Plus brake pad impresses with excellent deceleration values, even in the high temperature range. In contrast to the ME20 and ME22 pads, the MX72-Plus has heat protection plates.Coefficient of friction 0.39 - 0.47 µOperating temperature 50 - 750 °CSemi-metallic pad For the rear axle. Compatible vehicles:BMW M2 F87 Competition with large gray 6-piston sports brake Motorsport article - without STVZO approval.

With the AP-Racing Big Brake Kit, we offer a high-performance solution especially for track days and for race track drivers. The friction rings are mounted floating on the high-strength, milled aluminium pots. The advantages of this are, on the one hand, the lower weight and, on the other, the fact that the friction rings can be replaced cost-effectively when they wear out. The AP-Racing calipers are racing calipers without dust boots, which are only recommended for use on the racetrack (regular cleaning of the calipers is necessary in normal road traffic). Details and scope of delivery:- Big Brake Kit for the front/rear axle, consisting of AP Racing calipers and J-Hook brake discs in 378×34mm- AP Racing 6-piston brake caliper- Brake discs 378×34mm, J-Hook- CNC milled brake caliper adapter incl. material certificate- Braided steel brake lines- incl. brake padsAluminium pots and floating mounting Compatible vehicles:- BMW F87 M2 incl. Competition/CS- BMW F8x M3/M4 incl. Competition NOTES:If we do not expressly refer to a parts certificate or general operating licence (ABE) in the product text, this is a motorsport article that is not approved in the German Road Traffic Regulations (StVZO) and therefore the operating licence expires if no registration is made in accordance with § 21 StVO!This brake system can only be registered by us after special tests. Please note that vehicle spare parts should only be installed by a qualified specialist workshop in order to ensure that they function properly and that the vehicle is roadworthy.

Elegantly sporty - 3DDesign combines a perfect fit with uncompromising part quality. The best M2C set the market has ever seen. Compatible vehicles:BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

The Centre console cover for the rear seat made of pre-preg carbon fiber perfectly emphasize the style of the vehicle.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- Registration free Compatible vehicles: - BMW F80 M3 - BMW F82 M4 Coupe - BMW F83 M4 Cabrio - BMW F87 M2 - BMW F87C M2 - BMW G87 M2  Note: This is NOT an original BMW product!

Suitable for the following models:BMW F87 M2 Competition 302kW/411hpBMW F80 M3 317kW/431hpBMW F80 M3 Competition 331kW/450hpBMW F80 M3 CS 338kW/460hpBMW F82/F83 M4 317kW/431hpBMW F82/F83 M4 Competition 331kW/450hpBMW F82 M4 CS 338kW/460hpBMW F82 M4 GTS 368kW/500hp The Wagner tuning Ø57mm charge pipe kit for the S55 engine. Discover the new Performance Ø57mm Charge Pipe Kit from Wagner Tuning for your S55 engine. Designed to maximize the performance of your vehicle while improving durability, this kit offers a range of advanced features that will give your vehicle a real performance boost. Features:Optimized fluid dynamics:Compared to the OEM Charge Pipes, Wagner Tuning Charge Pipes offer a larger flow diameter and minimize internal cross-sectional changes, resulting in 40% less backpressure. This relieves the turbochargers and improves the response behavior.Robust construction:The charge pipes are made entirely of aluminum and withstand high pressures as well as aging. Unlike OEM products, they do not burst under load.Special powder coating:The Charge Pipes are coated with a special textured powder coating that not only improves corrosion protection, but also ensures an OEM look. Advantages:Maximized performance:The Performance Charge Pipe Kit improves flow dynamics and reduces back pressure, resulting in increased engine performance and responsiveness.Durability:Thanks to the robust aluminum construction and high-quality powder coating, Charge Pipes offer long-term durability and reliability.Easy installation:The kit is easy to install and requires no complex modifications. With the included mounting hardware, installation is a breeze. Scope of delivery:2 aluminum charge air pipes (black coated)2 silicone adapters (black)4 stainless steel hose clamps1 mounting material1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: without Eventuri carbon fibre charge pipes for S55 F8X models Full carbon S55 Chargepipes by Eventuri. Perfect thermal insulation and built for high pressures thanks to one of the most durable and robust materials on the tuning market. The full carbon fibre charge pipes for S55 engines (F-Series) are not only visually stunning, but also a real technical innovation. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 2 Series Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21 BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19 BMW 4 Series Coupe (F82)M4 GTS368kW / 500hp2979cm³S55 B30 A03.16 - 06.19

Facts: - Charge- & Boostpipe aluminium black - incl. mounting rubbers, clamps Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19

Cold Air Intake System by BlackBoost. Precision-engineered performance upgrade for BMW M2 Competition (F87) S55 3.0L I6 Twin-Turbo.

Verwandeln Sie Ihren F8X mit dem BlackBoost Kühllufteinlass-System in ein leistungsstarkes Kraftpaket. Erleben Sie mehr Leistung, Stil und Fahrdynamik mit diesem Premium-Upgrade. In der Welt der Leistungsmodifikationen ist die Airbox eine der wichtigsten Motorkomponenten, die Sie aufrüsten sollten. Die werksseitige Airbox ist in Bezug auf den Luftstrom und die Filterfläche sehr restriktiv. Unsere Kühllufteinlässe wurden entwickelt und konstruiert, um diese werksseitigen Einschränkungen zu überwinden und den maximalen Luftstrom mit den niedrigstmöglichen Temperaturen zu liefern, wenn man die Platzverhältnisse berücksichtigt. Die BlackBoost Cold Air Intakes sind so konzipiert, dass sie mit der Motorhaube des Fahrzeugs abschließen und eine gleichmäßige Abdichtung mit den Gummidichtungen der Airbox gewährleisten, während sie auch eine große Oberfläche gewährleisten, um richtig arbeiten zu können. Die BlackBoost Twin-Flow-Filter wurden speziell für einen maximalen Luftstrom und eine große Oberfläche entwickelt. Das BlackBoost Ansaugkit ist eine Plug-and-Play-Lösung, die ohne weitere Anpassungen perfekt funktioniert und für die kein zusätzliches Softwaretuning erforderlich ist. Es funktioniert auch problemlos in Kombination mit Turbo-Upgrades, Downpipes, Methanol-Einspritzungen etc., um die notwendige Luftströmung zu entfesseln und die volle Kapazität der Maschine nutzen zu können für diejenigen, die 1000+ WHP-Werte anstreben. Lieferumfang: - Pulverbeschichtete Airbox - Filter - BlackBoost CFD entwickelte Filteradapter Wesentliche Merkmale: - Nachgewiesene Leistungssteigerung von 8 bis 30+ PS bei Serienfahrzeugen - Verbessertes Ansprechverhalten über den gesamten Drehzahlbereich - Optimierter Luftstrom und vergrößerter Volumenbereich im Vergleich zur Serienausstattung - Vergrößerte Oberfläche der Filterelemente - Kann den Luftstrom für Konfigurationen mit 1000+ WHP unterstützen - Größere Oberfläche des Filterelements im Vergleich zum OEM - Plug-and-Play Installation zum Anschrauben - Keine ECU-Abstimmung erforderlich Kompatible Fahrzeuge: BMW M2 (F87) Competition BMW M2 (F87) Competition M BMW M3 (F80) BMW M3 (F80) Competition BMW M3 (F80) Competition M BMW M3 (F80) CS BMW M4 (F82) BMW M4 (F82) Competition BMW M4 (F82) Competition M BMW M4 (F82) GTS BMW M4 (F83) Competition M

Includes the following services:- Removing and replacing the connecting rod bearings- Check and measure crankshaft journals- Check and adjust the oil pump- Clean all parts- Wheel alignment- Oil & filter change- incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60)- Entry in the service booklet with BMW serial number stamp- 1 liter oil refillIn addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note:This service can only be carried out at our company headquarters!

Crank Hub Fix incl. working time and the following components:- Oil pan gasket- original set of aluminum screws- Valve cover gasket- Camshaft bolts- Chain tensioner sealing ring- Locking cap- Oil filter- Engine oil- incl. Aulitzky crankshaft lock Attention:The Crank Hub Fix is only available from us including installation.Shipping is not offered! Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21 BMW 2er Coupe (F87)M2 CS331kW / 450hp2979cm³S55 B30 A11.19 - 06.21 BMW 3er (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 4er (F82)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20

Scope of delivery: - Aulitzky tuning crankshaft lock incl. 8 original fastening screws - Fitting instructions Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21 BMW 3er (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3er (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 4er (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4er (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20

Your vehicle is missing a data display! We have it - the CANchecked display for the F-series (F21, F22, F23, F30, F31, F32, F33, F80, F82, F83 and F87. Access to all data from the engine:The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD28. The display for the E-series comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation through the slots remains intact. Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether “on-demand” (start at the tap of a finger) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Switch pages with the cruise control button:To make driving safer, we have integrated the cruise control switch here with the company Lightweight-Performance. When cruise control is not active, you can use the up/down button to switch the views in the display. This has the following advantages:- No “searching” for the display while concentrating on the road ahead- Switching even when wearing gloves (on trackdays)- Quick and safe checking of overview pages and then returning to the main viewDriver Dynamics:We have developed a special view for all track drivers who want to further improve their driving style and become a second or two faster:- G-forces (lateral and longitudinal acceleration)- Vehicle speed- Steering angle- accelerator pedal position- Brake pressure This sensor system gives the driver the opportunity to aim for even higher speeds in bends and to hit the braking point even later. Together with the data log in the internal memory, which can be downloaded from the display after a track day, this offers a great opportunity to synchronize the data with a video. Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, oil temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, boost pressure target, fuel pressure high pressure pump, exhaust back pressure, low pressure, front brake pressure, rear brake pressure, oil pressure Lambda/mixture:Lambda value target/actual, injection correction, long-term lambda adjustment, total ignition angle, ignition angle per cylinder Other data:RPM, air mass (g/s), vehicle speed, throttle angle, battery voltage, gear, accelerator pedal position, longitudinal and lateral acceleration, steering angle, yaw angle, torque, power, boost pressure control valve activation If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available. Attention: Not all values are available for all engines! For which engines and models is the display for F-series:The display fits the following vehicles:- 1 Series: F20, F21- 2 Series: F22, F23- 3 Series: F30, F31- 4 Series: F32, F33- M models: F87, F80, F82, F83 (Convertible) We currently support the following engines, unlisted engines can be added on request:- B48- B58- N13- N47- N55- N57- S55 The respective version for RHD (right-hand drive) is also available. The data may vary between the different engines. Read out and delete errors:Swipe down to access the “DTC” (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display. Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8” TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many customers always ask: “Which values can I query from my control unit”. The answer: “ALL”. Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger makes it possible to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Autotecknic dry carbon fibre diffuser for 2 Series F87 incl. Competition Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

The 3DDesign carbon diffuser for the F87 is made of carbon fiber/carbon fiber and gives the rear of the vehicle a new shine in no time at all. Installation is extremely simple - but the effect is all the greater. The calm design of the diffuser emphasizes the elegance of the otherwise sporty vehicle. Incl. parts certificate Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-049-01-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 20mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1165kg- Axle load rear axle: up to 1270kg- EC type approval number: e1*2018/858*00003..- Only for vehicles without levelling system BMW 4 (G82) M4 353kW / 480PS 7909-ACWBMW 4 (G82) M4 Competition 375kW / 510hp 7909-ACXBMW 4 (G82) M4 Competition M 375kW / 510hp 7909-ADABMW 4 (G83) M4 Competition M 375kW | 510hp 7909-ADB

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-045-05-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 30mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1120kg- Axle load rear axle: up to 1360kg- EC type approval number: e1*2007/46*2017*..- Only for vehicles without levelling system BMW 3 Series Touring (G21) year of construction 07.19- M340i xDriveM340i Mild-Hybrid xDrive330i xDrive320d xDrive320d Mild Hybrid xDrive330d330d Mild Hybrid

Plug and Play suitable for the following models: BMW G87 M2 338kW/460hp from 2023+ BMW G80/81 M3 (Competition) 353-375KW/480-510hp from 2021+ BMW G82 M4 (Competition/CSL) 353-405KW/480-550hp from 2021+Now with parts certificate! The 3.0L R6 biturbo engine (S58) is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by a total of 60 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. OEM water cooler dimensions: 505 mm x 605 mm x 30 mm V = 9.16 litres A = 3055 cm² WT water cooler dimensions: 505 mm x 605 mm x 48 mm V = 14.67 litres A = 3055 cm² With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

The Competition intercooler kit fits the following vehicles:Mercedes W 176 A160 1,6L 75KW/102hp (2016-2018)Mercedes W 176 A180 1.6L 90KW/122hp (2012-2018)Mercedes W 176 A200 1.6L 115KW/156hp (2012-2018)Mercedes W 176 A220 2.0L 135KW/184hp (2016-2018)Mercedes W 176 A250 2.0L 155-160KW/211-218hp (2012-2018)Mercedes W 176 A180 CDI 1.8L 80KW/108hp (2012-2014)Mercedes W 176 A200 CDI 1,8L 100KW/136hp (2012-2014)Mercedes W 176 A200 CDI 2,2L 100KW/136hp (2014-2018)Mercedes W 176 A220 CDI 2.2L 125KW/170hp (2012-2018)Mercedes C 117 CLA180 1.6L 90KW/122hp (2013-2019)Mercedes C 117 CLA200 1,6L 115KW/156hp (2013-2019)Mercedes C 117 CLA220 2.0L 135KW/184hp (2016-2019)Mercedes C 117 CLA250 2.0L 155-160KW/211-218hp (2013-2019)Mercedes C 117 CLA220 CDI 2.2L 125KW/170hp (2013-2019)Mercedes W 242 / W 246 B160 1.6L 75KW/102hp (2015-2019)Mercedes W 242 / W 246 B180 1.6L 90KW/122hp (2011-2019)Mercedes W 242 / W 246 B200 1,6L 115KW/156hp (2011-2019)Mercedes W 242 / W 246 B220 2.0L 135KW/184hp (2015-2019)Mercedes W 242 / W 246 B250 2.0L 155KW/211hp (2015-2019)Mercedes W 242 / W 246 B180 CDI 1.8L 80KW/108hp (2011-2014)Mercedes W 242 / W 246 B200 CDI 1.8L 100KW/136hp (2011-2014)Mercedes W 242 / W 246 B200 CDI 2.2L 100KW/136hp (2014-2019)Mercedes W 242 / W 246 B220 CDI 2.2L 125KW/170hp (2011-2019) Maximize the performance of your vehicle with our Competition high-performance intercooler! Unleash the true potential of your vehicle and experience the ultimate performance boost. With impressive mesh dimensions of 640mm x 200mm x 110mm and a remarkable capacity of 14,080cc, our Competition high performance intercooler offers a 25% larger flow area and an astonishing 110% more charge air volume compared to the standard intercooler. Our Competition high performance mesh exceeds all expectations when it comes to cooling performance. Even under extreme conditions, this intercooler keeps a cool head. Despite its impressive performance, this intercooler is surprisingly light at 10.5 kg. Thanks to our advanced technology and the use of cast aluminium for the free-form end boxes, we have minimized back pressure and maximized performance. Our intercoolers are equipped with an anti-corrosion coating with outstanding heat conduction properties. This guarantees permanent and optimal cooling, which is noticeable in a significant increase in performance. Our kit is completely ready to install, and replacement with the standard intercooler is straightforward - a true plug-and-play experience. This intercooler was developed to meet the highest demands of racing. With a pressure test of up to 6 bar, it is ready for action-packed racetracks. All our products are subject to strict quality control to ensure they meet the highest standards. Push your limits and boost your vehicle's performance to a new level. Our Competition high performance intercooler is the best choice for demanding drivers who want more. Ready for the ultimate driving experience? Get our Competition high performance intercooler today and feel the difference! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 25% larger inflow area- 110% more charge air volume- less back pressure- Plug & Play Scope of delivery:1 intercooler2 aluminum adapters1 mounting material1 parts certificate + installation instructions With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Facts: - only suitable for N 2.0l Turbo 184kW / N Performance 2.0l Turbo 202kW without gasoline particulate filter - replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - with ECE approval* Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction Hyundai i30 III (PD)i30 N184kW / 250hp1998cm³G4KH07.17 - Hyundai i30 III (PD)i30 N Performance202kW / 275hp1998cm³G4KH07.17 - Note: Depending on the software version, the check engine light may come on. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.